35L Internal Mixer Wear Parts Thermocouple Thermistor

Introduction to Dalian Chengfeng Rubber and Plastic Machinery Co., Ltd.

Dalian Chengfeng Rubber and Plastic Machinery Co., Ltd. was established in 2013. Main business: pressurized kneader, 35L internal mixer parts, 55L kneader parts, 75L internal mixer maintenance and parts, 110L rubber mixing machine parts, 150L rubber mixing machine parts and maintenance, 200L internal mixer rotor shaft; XK360 open mill roller, XK400 open mill roller, XK450 open mill parts and maintenance, XK550 open rubber mixing machine parts, XK560 open mill parts and maintenance roller, as well as 3L experimental internal mixer and 1L internal mixer and XK160 double-roll open mill experimental machine. Custom parts can be made after surveying and drawing based on provided samples. 

35L Internal Mixer Wear Parts Thermocouple Thermal Resistor

Name: Internal mixer thermal resistor, Kneader thermocouple, Rubber machinery parts

Size: 35L-55L-75L

Type: pt100 type, K type, E type

Standard type: pt100 type

Thermal resistor length: 70~75mm

Thermal resistor position: Bottom of the mixing chamber pot

During use, the model of the thermal resistor must match the model of the temperature gauge.

Method to check the temperature gauge: The model is inside the small operation box, on the back of the temperature gauge.

Thermal resistor installation requirement: 1~2mm above the mixing chamber installation port

Composition of thermal resistor: Consists of three parts: probe head (machined part) + junction box (finished part) + connecting sleeve (self-made part)

Head diameter: φ10mm

The internal mixer thermal resistor measures the surface temperature of the mixed rubber; a temperature gun also measures the surface temperature. The internal temperature of the mixed rubber is different from the surface temperature.

The kneader thermal resistor head, i.e., the internal mixer thermal resistor head, is a wear part, and the internal wire is relatively thin. In both automatic and manual modes, the temperature is involved in the entire mixing process, and the material is discharged when the temperature exceeds the alarm limit.

Function of thermal resistor: There is a thermocouple at the bottom of the mixing chamber to measure temperature, which participates in rubber mixing control and is displayed on the temperature gauge in the operation box for real-time monitoring of material temperature.

Dalian Chengfeng Rubber and Plastic Machinery Co., Ltd. Information

1) Company Name--------Dalian Chengfeng Rubber and Plastic Machinery Co., Ltd.

2) Factory Address--------No. 251, Bin East Road, Gangou Village, Zhuanghe City, Dalian

3) Part Name--------35L Internal Mixer Wear Parts Thermocouple Thermal Resistor

4) Thermal resistor accuracy: Generally 0~2%

5) Thermal resistor models: pt100, K type, and E type

6) Pressurized kneader thermal resistor length: 70~75mm (slightly longer or shorter is acceptable, adjustable with the rear electrical rod). Universality: Thermal resistors for Dalian internal mixers are generally universal; thus, whether for Dalian Erxiang internal mixers or Huahan internal mixers, they are mostly interchangeable.